1. Latest Usermods topics - WLED - Discourse
Usermods ; Govee API integration with WLED. 14 ; Using TFT/LCD/OLED to display WLED info. 5 ; AudioReactive activation. 7 ; Quinled Digiquad V2.r7 and Onboard Temp ...
Post usermod requests, or ask for help regarding usage or development of your own mod!
2. Custom Features - WLED Project
Create a custom effect as usermod. Since 0.14. This feature was introduced with version 0.14. It is possible to add new effects in form of a usermod.
Warning
3. Usermod Four line display - WLED MoonModules Project
Provides a four line display using either 128x32 or 128x64 OLED displays. It can operate independently, but starts to provide a relatively complete on-device UI ...
First, thanks to the authors of the ssd11306_i2c_oled_u8g2 mod.
4. New to programing How to use usermods - WLED
17 jun 2021 · Each usermod is supposed to provide instructions on what to add or replace in order to integrate their usermod. V1 usermods are more difficult ...
Hello to all, I’m am new to programming and new to using platformio just found WLED and have been trying to add the temperature usermod to a ESP32 and I am completly stuck. I am confused about Version 1 and Version 2 usedmods and as how to define the items and into what folders. I have tried so may different ways but apparently not the right way. I have resorted to just using 2 esp32 one for the leds and another for the temp sensor DS18B20 with MQTT. It’s just bugging me to know I can do this wi...
5. Usermod global pins - WLED MoonModules Project
HW_PIN_* variables are used in platformio to specify defaults for global pins, HW_PIN variables not used in usermods, there only global pin variabes are used ...
This page is work in progress
6. QuinLED-An-Penta DIY WLED and Usermod
Special usermod! ezcGman | Andy has worked hard creating a usermod for WLED allowing you to use a lot of the boards functionality such as the temperature sensor ...
QuinLED-An-Penta DIY WLED and Usermod Back to QuinLED-An-Penta-DIY index page Generic configuration Basic configuration data For a generic configuration in WLED please see the pinout guide which pins to use! Here you can find everything from the GPIOs used for the LED channels, buttons, etc. Special usermod! ezcGman | Andy has worked hard creating a […]
7. MultiRelay - WLED MoonModules
Multi Relay. This usermod-v2 modification allows the connection of multiple relays, each with individual delay and on/off mode. HTTP API. All ...
This usermod-v2 modification allows the connection of multiple relays, each with individual delay and on/off mode.
8. Usermod Battery - WLED MoonModules Project
Welcome to the battery usermod!. Enables battery level monitoring of your project. For this to work, the positive side of the (18650) battery must be ...
9. Usermod Rotary Encoder - WLED MoonModules Project
Rotary Encoder UI Usermod ALT ... The core of these usermods are a copy of the originals. The main changes are to the FourLineDisplay usermod. The display usermod ...
First, thanks to the authors of other Rotary Encoder usermods.
10. ESP8266 WLED Hardware Experimentation Platform : 10 Steps
Time to configure usermods. Navigate to the Usermod Setup page of your WLED device or by adding /settings/um to its' address - for example, https://my-led ...
ESP8266 WLED Hardware Experimentation Platform: Yes, yet another WLED controller ! This one focuses on setting up basic hardware features for those who don't like to only rely on WiFi remote (I am one of those). It is mainly based on LOLIN D1 eco-system for KISS but still DIY. The CPU is the chea…
11. Welcome to WLED MoonModules & Sound Reactive - WLED ...
The Atuline/WLED fork is also called WLED SR (Sound Reactive). More ... Usermods are the readme.md files of usermods and will move to upstream (see ...
12. Usermod PIRsensorSwitch - WLED MoonModules Project
PIR sensor switch. This usermod-v2 modification allows the connection of a PIR sensor to switch on the LED strip when motion is detected. The switch-off occurs ...
This usermod-v2 modification allows the connection of a PIR sensor to switch on the LED strip when motion is detected. The switch-off occurs ten minutes after no more motion is detected.
13. Weather usermod - WLED MoonModules Project
Weather · Introduction · Settings · Fork specific info. WLED SR. Not supported. WLED AC. Not supported. Back ...
This page is work in progress
14. Usermod Animated Staircase - WLED MoonModules
Usermod Animated Staircase · Light up the steps in the direction you're walking. · Switch off the steps after you, in the direction of the last detected ...
This usermod makes your staircase look cool by illuminating it with an animation. It uses PIR or ultrasonic sensors at the top and bottom of your stairs to:
15. Audio Reactive WLED - WLED Project
First time this was implemented by a Sound Reactive Fork. As of WLED version 0.14.0-beta1 an usermod is available for original WLED too. Currently only ESP32 ...
Audio Reactive WLED is a possibility of using WLED controllers in such a way that the LEDs react to music and light up in time. First time this was implemented by a Sound Reactive Fork. As of WLED version 0.14.0-beta1 an usermod is available for original WLED too. Currently only ESP32 microcontrollers are supported.
16. Other Hardware - WLED Project
I2C & SPI display, can be used with 4 Line Display usermod. DS18B20, Recommended temperature sensor for use with WLED. Compatible with the Temperature usermod.
Still under construction, feel free to add to the list!
17. Install WLED Binary - WLED Project
In case you want to flash WLED with audioreactive usermod: Several users reported that this alternative, unofficial installer site may work better: https://wled ...
Tip
18. Control a Relay - WLED Project
Second option for controlling multiple relays is using a Multi Relay usermod. As with Alexa you will need to compile WLED from source an include Multi Relay ...
Digital LED strips still use power when seemingly switched off, about 1W per 200 LEDs. In case you want to prevent that, you can completely cut power to the LEDs by adding a relay to your circuit. It is toggled by WLED when WLED is turned on/off (in the UI, or through other interfaces). No pin is allocated for a relay by default, but can be easily set in the LED preferences page. Previously, GPIO12 (Pin D6 on many devices) was set as the default and is confirmed to work well on most boards except the ESP32-C3.